How To Clean Jets In Whirlpool Tub

How To Clean Bathtub Jets with Basic Household Ingredients

SaveComments

In that location's nothing quite similar sitting down for a relaxing bath only to find water with floating black flecks, hair, and who-knows-what-else. Unfortunately, if you're the owner of a jetted bathtub, this lament may seem all-too-common given that the crevices of the jets tend to collect gunk that is hard to clean by hand. Simply there are some simple ways to continue those jets make clean using basic household ingredients.

Fill the tub until the jets are covered by 2-3 inches of hot water.
Add 2 Tablespoons of a low-sudsing dishwashing liquid and 1/2 loving cup of bleach. If yous want to continue things green, you can substitute ane cup of white vinegar for the bleach. (Notation: Some manufacturers don't recommend bleach since it can dry out out internal gaskets with fourth dimension, then you may want to resort to the tough stuff only in filth emergencies.) Alternatively, you tin can use powdered dish detergent.
Run the tub's jets for 15 minutes.
Empty the tub, and refill it (cold water is fine this time). Run the jets for 10 minutes more.
Drain the tub and rinse it well to get the gunk off.
If you need a really deep make clean, you lot tin can set on the jets with a bottle castor and a nonabrasive material.
If there's however clay around the jet covers, endeavor using dental floss to get behind them.

And a final note: Before cleaning your jets for the outset time, check the manufacturer's manual. Some manufacturers recommend closing the air controls, while others recommend leaving them open up during cleaning, and certain manufacturers recommend specific cleansers for their tubs.

Carolyn Purnell

Historian and Author

Carolyn is a lover of all things colorful and quirky. She grew up in Texas and settled in L.A. by manner of Chicago, England and Paris. She is the author of The Sensational By: How the Enlightenment Changed the Way Nosotros Use Our Senses.

Follow Carolyn

SaveComments